
Soot, smoke, and charred framing handled by a licensed crew
Attic Fire Restoration MISSION HILLS CA done right the first time
Attic Fire Restoration MISSION HILLS CA starts with a same-day inspection and a written scope before we touch a single board. Attic fires smolder in insulation and framing for hours, so the damage you see is rarely the damage that matters. We handle attic fire damage repair in MISSION HILLS California for homeowners, landlords, and property managers across Santa Barbara County, from first tarp-over to final odor clearance.
What's included
What Our Attic Fire Restoration Covers
Our scope covers everything from emergency stabilization through final rebuild and odor clearance. Add-ons like contents cleaning or full roof replacement are quoted separately, and we tell you upfront which items are which so there are no surprises on the invoice.
Emergency board-up and tarp
Same-day protection for open roof decking and broken windows, usually within 2 to 4 hours. We use heavy-duty tarps and structural board-up so rain and animals stay out until the rebuild starts.
Soot and debris removal
HEPA vacuuming of every joist bay, soot sponge wiping on rafters, and sealed removal of charred lumber and contaminated insulation. A typical 1,200 sq ft attic takes 2 to 3 days.
Odor neutralization treatment
Thermal fogging, hydroxyl generator or ozone generator cycles, and duct cleaning with duct sealant. Treatment runs 24 to 72 hours and is verified with a clearance walk before rebuild.
Structural repair and rebuild
Sistering or replacing charred rafters, patching sheathing, and installing new insulation to California Title 24 levels. Roofing, electrical, and plumbing work is done by the matching licensed trade.
Insurance documentation package
Photo logs, moisture readings, thermal images, and a line-item scope formatted for adjusters. You get a copy of everything, and we are available to walk your adjuster through the file.
Service overview
What Attic Fire Restoration MISSION HILLS CA Really Involves
Attic Fire Restoration MISSION HILLS CA is the full-scope trade work of stabilizing, cleaning, and rebuilding a residential attic after a fire. That means removing charred lumber and contaminated insulation, HEPA-vacuuming settled soot from every joist bay, sealing smoke odor into drywall and sheathing with an encapsulant sealer, and replacing what cannot be saved. It is not a shop-vac job. Smoke travels through the roof deck, soffit vents, and HVAC returns, so a fire that looked contained to one corner usually reaches the whole envelope.
Most attic fires in this area start at three points: a failed electrical junction, a dryer or bathroom exhaust fan with lint packed around the housing, or a lightning strike on an older roof. By the time the fire department leaves, you are dealing with charred structural framing plus water damage from firefighting that soaks insulation and creates perfect conditions for mold growth after fire suppression. That is why we run moisture meters and a thermal imaging camera before we quote anything.
The service timeline
What to Expect From Start to Finish
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency response
We arrive, walk the attic with you, and document everything with photos and moisture readings. Roof openings get tarped or boarded, and we set a negative air machine if soot is migrating into living space. This visit takes 60 to 90 minutes.
Soot and debris removal
Crews in full PPE HEPA-vacuum every joist bay and wipe surfaces with a soot sponge before anything gets wet. Charred lumber and saturated insulation come out in sealed bags. A 1,200 sq ft attic typically takes 2 to 3 days.
Odor and air treatment
We seal the attic and run a thermal fogger, then set a hydroxyl generator or ozone generator on a timed cycle. Ductwork gets cleaned and sealed with duct sealant. Treatment runs 24 to 72 hours depending on how deep the smoke penetrated.
Structural repair and rebuild
Rotted or charred framing is sistered or replaced, sheathing is patched, and new insulation goes in to current California Title 24 levels. Roofing, electrical, and plumbing work is done by the matching licensed trade. Most rebuilds run 5 to 12 working days.
Final walk and warranty
We do a room-by-room walk with you, take clearance photos, and hand over a written workmanship warranty. If odor returns within the warranty window, we come back at no charge. You also get a copy of every document for your insurer.
Tools & methods
Equipment and Standards We Work To
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds hot spots and hidden smoke paths behind drywall and sheathing that the eye cannot see. It is how we catch a smoldering rafter two bays over from the visible damage.
HEPA vacuum and soot sponge
Removes settled soot from joist bays and rafter faces without spreading it into the air. Soot is acidic and etches metal and wood if it is left in place.
Thermal fogger
Pushes a thermal fogging solution into wall cavities and framing where smoke odor has soaked in. It reaches places a spray bottle never will.
Hydroxyl generator and ozone generator
Neutralizes smoke odor in the air and on surfaces on a timed cycle. Hydroxyl units are safe for occupied adjacent spaces; ozone units run in sealed, unoccupied attics only.
Negative air machine and air scrubber
Creates negative pressure so soot and odor do not migrate from the attic into living space during demolition and cleaning.
Dehumidifier and air mover
Dries the framing and insulation soaked by firefighting water before mold growth after fire suppression can start, usually within 48 to 72 hours.
Moisture meter
Verifies dry-down readings on framing and sheathing so the rebuild does not close up wet lumber. We log the readings for your insurance file.
Use cases
When to Call for Attic Fire Restoration
These examples show how the service framework adapts rather than forcing every call through one repair.

Lightning Strike Hot Spot in Mission Hills Estates
A lightning strike smoldered in the insulation for hours before the homeowner smelled smoke. Visible damage was limited to one small area, but a thermal imaging camera found hot spots two bays over. → We removed insulation and sheathing from three bays, treated the whole attic with a thermal fogger and hydroxyl generator, and patched the deck and roofing. The hidden hot spots were caught before a second fire started.
Historic Home Electrical Fire in Downtown Mission Hills
A junction box failed in a 1920s home with knob-and-tube wiring, charring two rafters and spreading smoke through the roof void. The original cedar shake roof made access tricky and the claim needed strong origin documentation. → We documented origin per NFPA 921, removed the charred lumber, treated the smoke, and coordinated the C-10 electrical repair and C-39 roofing rebuild. The historic roof line was preserved and the job closed in 14 working days.
Problems we solve
Attic Fire Problems We Fix Before They Spread
Attic fires cause damage that is invisible from the living room. These are the problems we find on almost every job, and the ones that get worse every week they are left alone.
Smoke odor soaked into walls and HVAC
We run a thermal fogger and hydroxyl generator on a timed cycle, clean the ductwork, and seal surfaces with an encapsulant sealer. Most homes pass a clearance sniff test in 3 to 5 days.
Hidden smoke damage behind drywall
We use a thermal imaging camera and moisture meter to map where smoke traveled, then open, clean, and reseal those cavities before the rebuild closes them up.
Water damage from firefighting
We set dehumidifiers and air movers the same day, dry the structure to verified readings, and document the dry-down so your insurer sees the mold risk was handled.
Code violations after fire
We rebuild to current code under a CSLB B license, with C-10 electrical and C-39 roofing trades as needed. The scope is written to pass Santa Barbara County inspection the first time.
Pricing process
What Attic Fire Restoration Costs
$4,500 - $18,000 depending on scope
Size of the burn area
A fire contained to one rafter and 40 sq ft of sheathing is a much smaller scope than one that spread across the roof void. Square footage of charred framing and sheathing is the single biggest cost driver.
Framing and sheathing damage
Sistering a rafter is cheaper than replacing a truss. When more than about 30 percent of the load-bearing members are compromised, the structural repair scope grows quickly.
Odor penetration depth
Smoke that soaked into insulation and framing needs longer hydroxyl or ozone treatment and more encapsulant sealing. Deep penetration can add 2 to 3 days to the schedule.
How much does Attic Fire Restoration cost in MISSION HILLS CA?
Typical 2026 pricing runs $4,500 to $18,000 for a residential attic, with most single-family jobs landing near $9,000. Small contained fires with limited framing damage can come in under $5,000, while a fire that reached the roof deck and HVAC often runs $20,000 or more. Insurance usually covers the bulk of it, and we provide the line-item scope your adjuster needs.
Who does attic fire damage repair near me in MISSION HILLS California?
We do, and we handle the whole scope rather than just the cleanup. That includes soot removal, odor treatment, framing and sheathing repair, insulation replacement, and the roofing and electrical work that follows. Call (833) 929-6186 and we will walk the attic with you the same day.
Can attic fire restoration save my roof in MISSION HILLS CA?
In most cases yes. If the charring is limited to sheathing and a few rafters, we sister the damaged framing and patch the deck rather than replacing the roof structure. Full replacement is only needed when the fire burned through trusses or compromised more than about 30 percent of the load-bearing members.
How long does attic fire restoration take in MISSION HILLS?
A typical job runs 2 to 4 weeks from board-up to final walk. Cleanup and odor treatment take 4 to 7 days, and the rebuild adds 5 to 12 working days depending on permit timing with Santa Barbara County. Small contained fires with minimal framing damage can wrap in 10 to 14 days.
Ready when you are
Need Attic Fire Restoration MISSION HILLS CA Today?
We answer the phone 24/7 and board up open roofs the same day. One call gets you a licensed crew, a written scope, and a schedule you can hand to your adjuster. Call (833) 929-6186 now.

Talk with the local team
Request Attic Fire Restoration
Call us any hour of the day or night at (833) 929-6186. A live dispatcher answers, takes your address and insurance details, and routes the nearest crew. Most MISSION HILLS addresses see a technician within 60 to 90 minutes. You can also email info@firedamagerestorationmissionhills.com and we will respond the same business day.


